Tuesday, July 22, 2008

Myth: Sleepy After Thanksgiving Dinner

Sleepy After Thanksgiving Dinner

 

The drowsiness that many people experience after a Thanksgiving feast is not a result of the turkey alone. Instead, it is the carbohydrate rich meal that accompanies the turkey that causes people to feel sleepy. The amino acid tryptophan can be metabolized to produce serotonin, a neurotransmitter that causes a calming effect and regulates sleep. Tryptophan is found in high levels in protein rich foods, such as turkey. Yet the amount of the amino acid present in turkey is not nearly high enough to have immediate effects, and similar concentrations of tryptophan are found in other foods that do not cause any affects. Contrary to popular belief, it is the carbohydrates consumed during a meal that cause drowsiness.

Once the tryptophan is in the bloodstream, it is competing with many other amino acids to take the journey across the blood-brain barrier. When carbohydrates are consumed, the pancreas secretes insulin, which causes the competing amino acids to leave the bloodstream and enter the muscle cells. This increases the relative concentration of tryptophan in the bloodstream and allows more of it to reach the brain and become serotonin. Basically, any carbohydrate rich diet that has some protein in it can cause the familiar sleepy feeling after a meal.

 

http://chemistry.about.com/od/holidaysseasons/a/tiredturkey.htm

http://wiki.answers.com/Q/Why_does_eating_turkey_on_Thanksgiving_make_you_sleepy

Mozart Mania

Myth: Playing music such as Mozart to babies increases intelligence

Fact: Research has found that the “Mozart Effect” does not exist

The Mozart effect is defined as the “increase in brain development that occurs in children under age 3 when they listen to the music of Wolfgang Amadeus Mozart” (Skeptics’ Dictionary). The concept originated in 1993 when two physicists, Rauscher and Shaw, conducted an experiment. After a group of college students listened to Mozart, they exhibited a short-term spatial-temporal reasoning enhancement. However, despite multiple efforts, similar results were not replicated. Several years later in 1997, Rauscher and Shaw performed another experiment that uncovered the power of Mozart’s music to enhance children’s reasoning abilities:

“The experiment included three groups of preschoolers: one group received private piano/keyboard lessons and singing lessons; a second group received private computer lessons; and a third group received no training. Those children who received piano/keyboard training performed 34% higher on tests measuring spatial- temporal ability than the others. These findings indicate that music uniquely enhances higher brain functions required for mathematics, chess, science and engineering” (Neurological Research, February 1997).

The discovery of this experiment launched a new industry, especially in the media. The Mozart effect sparked books, tapes, CDs, and programs that were not backed by extensive scientific evidence. The research of one experiment published in a scientific journal became an automatic truth. The media jumped on the bandwagon while distorting and exaggerating the not-so-scientific findings.

The experiment conducted was only a fluke. While some kids did have high scores, others scored unusually low. Current research has not found any links to the Mozart effect. However, this does not mean music and the brain do no share a connection. With additional research and more controlled experiments the link between intelligence and music may be discovered.

Ego Development:
http://www.egodevelopment.com/10-debunked-myths-myths-about-our-brain/

The Skeptics' Dictionary:
http://www.skepdic.com/mozart.html

Head Injuries and Brain Cell Loss

Can a blow to the head actually lead to brain cell loss? The fact that brain cells can be lost due to head injuries is often overlooked by many when the injury is not severe. A traumatic head injury, such as a major concussion, can lead to the disconnection of some brain cells, which in turn causes cell death. Similar to how the affects of an injury can vary the seriousness of a concussion also varies. The brain basically floats inside the skull while immersed in spinal fluid. Although the skull is able to protect the brain from external trauma, it cannot absorb the impact of the force. The brain could hit the inner wall of the skull following a blow to the head, leading to bruising in the brain.
A minor concussion, or a weaker blow to the head, can leave a person vulnerable for more serious injury. Athletes who play contact sports are often prone to concussions. The dangers of a minor concussion come from the athlete continuing play with an injury that has not fully healed. The chances of the injury becoming critical are increased enough that another blow can cause rapid swelling of the brain and death.
A hit to the head can cause microscopic damage that is not visible on a CT scan, but still contains some bruising and bleeding. Many neurologists have been concerned that repeated injuries may cause problems later in life. While the injuries may appear to have healed, there can be a loss of brain cells. The loss of some brain cells may lead to additional harm to other brain cells. When it comes to the head, a person can never be too careful. There is a reason why doctors stress that athletes take time off when a head injury is involved.
References:
http://www.sciencedaily.com/releases/2008/03/080303190628.htm
http://query.nytimes.com/gst/fullpage.html?res=9500E5DC123EF932A35756C0A96E958260 http://www.neurosurgerytoday.org/what/patient_e/concussion.asp

Monday, July 21, 2008

Plants Make Vaccine for Treating Type of Cancer in Stanford Study

Plants could act as safe, speedy factories for growing antibodies for personalized treatments against a common form of cancer, according to new findings from the Stanford University School of Medicine. The findings came in the first human tests of an injectable vaccine grown in genetically engineered plants.
The treatments, which would vaccinate cancer patients against their malignant cells, could lead to earlier personalized therapy to tackle follicular B-cell lymphoma, an immune-system malignancy diagnosed in about 16,000 people each year.
Doctors regard follicular B-cell lymphoma as a chronic, incurable disease. The standard treatment, chemotherapy, has such severe side effects that patients often opt for watchful waiting in the early stages of illness. However, plant-grown vaccines, which lack side effects, could allow earlier, more aggressive management of the cancer.
"This would be a way to treat cancer without side effects," said Ronald Levy, MD, professor of oncology and the Robert K. and Helen K. Summy Professor in the School of Medicine, who is the study's senior author. "The idea is to marshal the body's own immune system to fight cancer."
The findings will appear July 21 in the advance online issue of the Proceedings of the National Academy of Science. The study was a phase-1 trial that showed plant-grown cancer vaccines were safe for patients and could be produced quickly and cheaply. Sixteen newly diagnosed lymphoma patients received the treatment; none experienced any side effects from plant-grown vaccines.
Future studies will test the vaccine's effectiveness.
The cancer vaccines rely on a biological quirk of follicular B-cell lymphoma, which is a type of non-Hodgkin's lymphoma. The cancer starts when a single immune cell multiplies uncontrollably, producing many identical clones of itself. The clones all carry the same antibody on their exterior, a marker that is unique to the cancer and is not found on any of the body's healthy cells. Levy's vaccination strategy is to inject many copies of the cancer-specific antibody into a newly diagnosed lymphoma patient, stimulating the patient's immune system to seek and destroy malignant cells.
Previous trials of this kind of vaccine, produced in animal cells and tested in mice and humans, have had mixed success, and the vaccines are not yet commercially available. Growing cancer vaccines in plants could circumvent some of the hurdles to turning the concept into a real treatment, Levy said.
Because each person's cancer antibody is unique, every patient needs a personalized vaccine. Growing personalized vaccines in animal cells takes months, costs thousands of dollars per patient and comes with the theoretical risk that a patient might inadvertently be infected with an animal virus that contaminated the cells used to grow the vaccine. Personalized vaccines could also be produced with genetically engineered bacteria, but bacteria-grown vaccines aren't ideal, either.
"The plant system has some advantages," said Levy, who is also a member of the Stanford Cancer Center and a Howard Hughes Medical Institute investigator.
The researchers chose tobacco plants that were genetically engineered to reproduce quantities of the vaccine. To make a tobacco plant churn out a human antibody, scientists isolate the antibody from the patient's tumor and put the antibody gene into a modified version of the tobacco mosaic virus. They infect a tobacco plant with the gene-carrying virus by scratching the virus on its leaves. The virus takes the gene into the plant's cells, which then churn out lots of antibody. After a few days, technicians snip off the plant's leaves, grind them up and purify the antibody. Only a few plants are needed to make enough vaccine for each patient.
"The new manufacturing system allows very rapid production of a vaccine," said Charles Arntzen, PhD, a professor of plant biology at the Arizona Biodesign Institute at Arizona State University, who was not involved in the research. "I think without the speed, it would be hard to convince a cancer patient to wait for a vaccine to be developed, rather than going on some other therapy."
"It's pretty cool technology," Levy said. "And it's really ironic that you would make a treatment for cancer out of tobacco. That appealed to me." None of the harmful chemicals found in cigarettes end up in the purified vaccines.
Not only is the technology fast, cheap and safe, but Levy said there's reason to expect that the plant-grown antibodies will generate a stronger immune response than those made in animal cells. Both plant and animal cells attach sugars to antibodies and other proteins during biochemical processing, but the plant and animal sugars are different. The difference might prompt a more robust immune response to plant-grown antibodies, Levy said.
The next research step is a phase-2 clinical trial to test the effectiveness of plant-grown vaccines in a larger group of lymphoma patients, Levy said. He's optimistic, adding, "We know that if you get the immune system revved up, it can attack and kill cancer."
The research team included scientists from Stanford, Touro University in Vallejo, Calif., and the biotechnology companies Large Scale Biology Corp., CBR International Corp., Bayer HealthCare, Integrated Biomolecule Corp., The Biologics Consulting Group Inc. and Holtz Biopharma Consulting.
The study was funded by a grant from the National Institutes of Health and by Large Scale Biology Corp.

Sunday, July 20, 2008

Researchers Grow Human Blood Vessels In Mice From Adult Progenitor Cells

ScienceDaily (July 18, 2008) — For the first time, researchers have successfully grown functional human blood vessels in mice using cells from adult human donors — an important step in developing clinical strategies to grow tissue, researchers report in Circulation Research: Journal of the American Heart Association.
“What’s really significant about our study is that we are using human cells that can be obtained from blood or bone marrow rather than removing and using fully developed blood vessels,” said Joyce Bischoff, Ph.D., senior author of the study and associate professor at Harvard Medical School and Children’s Hospital Boston.
The researchers combined two different types of progenitor cells in a culture dish of nutrients and growth factors, then washed off the nutrients and implanted the cells into mice with weakened immune systems. Once implanted, the progenitor cell mixture grew and differentiated into a small ball of healthy blood vessels.
Progenitor cells are similar to stem cells but can only differentiate into specific cells, while stem cells can differentiate into practically any cell in the body.
In the study, researchers used two different kinds of progenitor cells to grow blood vessels: the endothelial progenitor cells (EPCs), which become cells that line the vessels, and mesenchymal progenitor cells (MPCs), which differentiate into the cells that surround the lining and provide stability.
The researchers used different combinations of the two types of progenitor cells. They found that a mixture of adult blood- and adult bone marrow-derived progenitor cells or a combination of umbilical cord blood-derived and adult bone marrow-derived cells resulted in the greatest density of new blood vessel formation.
The ability to rapidly grow two-layered blood vessels without using embryonic or umbilical cord blood stem cells could skirt many ethical concerns, Bischoff said. It would also solve a persistent problem in treating several medical conditions that result from ischemia — the inability of oxygen-rich blood to reach an organ or tissue — such as heart attacks, wound healing and many acute injuries.
“What we are most interested in right now is speeding up the vascularization (the formation of blood vessels),” Bischoff said. “We see very good and extensive vasculature in seven days and we’d like to see that in 24 or 48 hours. If you have an ischemic tissue, it’s dying tissue, so the faster you can establish blood flow the better.”
If researchers can develop ways to speed the growth of the vessels, non-surgical cardiac bypass procedures could potentially grow new vessels around those blocked by atherosclerosis.
Bischoff said other findings include:
* The cells created a vigorous network of vessels that connected to one another and to the vessels of the host mouse within seven days and continued to transport blood during the four-week study.
* Once combined and implanted, the two progenitor cells arranged themselves into vessels with minimal outside help, i.e., without any genetic alteration or manipulation to improve their growth. This is important because many growth-promoting genes are the same genes that become activated in cancer.
* Mixtures of EPCs and MPCs from adult donors were as effective at generating vessels as those made from a mixture of cord blood EPCs and adult bone marrow MPCs. That finding increases the likelihood of someday being able to easily find clinically useful amounts of progenitor cells. The research could also enhance tissue engineering — growing new organs for later implantation into patients, another medical research field that needs good sources of microvascularization to develop, Bischoff said.

Co-authors are Juan M. Melero-Martin, Ph.D., lead author; Maria E. De Obaldia, A.B.; Soo-Young Kang, Ph.D.; Zia A. Khan, Ph.D.; Lei Yuan, Ph.D.; and Peter Oettgen, M.D. Individual author disclosures can be found on the manuscript.
The U.S. Army funded the research.

[http://www.sciencedaily.com/releases/2008/07/080718180719.htm]

Friday, July 18, 2008

Types of Artificial Hearts

Types of Artificial Hearts
Artificial hearts are devices that try to mimic either all or a part of the heart’s function. They are generally used for people who are not eligible for heart transplants. There are mainly two broad types of artificial hearts. There are Cardiac (heart) assist devices [CAD] and Total Artificial Hearts (TAH). CAD’s help the heart; they don’t do all the work for it. CAD’s are usually composed of left, right, or a combination of ventricular assist devices. When these devices are used the heart is not removed from the body, but rather the device takes the place of the heart’s components.
TAH’s are a little more complex in their nature. When these are used the heart must be completely removed from the body, and these devices are put in. these are similar to getting a human donor heart. TAH’s have decent reliability and are widely used in current times.
William Kolff in the early 1900’s invented the first TAH and from then on newer models were developed. The most widely known type of artificial heart is the Jarvik 7. This was invented by Dr. Robert Jarvik in 1982, so until relatively recently we had no replacement for a heart. The first patient it was used on ended up dying in only 112 days. The pump itself worked fine it was just its meeting with the body that caused problems. Currently Dr. Jarvik is working on a new type of artificial heart that is the size of one’s thumb. He will be calling this the Jarvik 2000.
A third type of artificial heart that is not yet been tested through time but has engineers rigorously working on is the electric heart. Dr. Michael DeBarkey has been the first to use this new device, but the public still has yet to see if it works well.
http://inventors.about.com/library/inventors/blartificialheart.htm
http://en.wikipedia.org/wiki/Artifical_heart
http://www.texasheart.org/Research/Devices/j7tah.cfm

Types of Stents

The Jarvik-7 Artificial Heart

The Jarvik-7 Artificial Heart Among the most controversial of medical ethical issues is the Jarvik-7 Aritificial Heart. Its controversial nature began with its first permanent implantation in patient Barney Clark. Clark was a dentist from Seattle who wished to help further the research in this particular area. The issue in its entirety deals with the ethics of implanting humans with these hearts in this experimental manner.

Aside from its controversial nature and the media's subsequent focus on many of the complications in the patients that followed, the Jarvik-7 is the most successful artificial heart of its kind to have ever been designed. Five patients were implanted with the Jarvik-7 as a permanent replacement for the heart. On average, these patients lived 10 months, each with complications along the way. William Schroeder was among these five, and he lived longest on the Jarvik-7, for a period of 620 days.

Because the the Jarvik-7 proved to be viable for extended periods of time but not for "forever" so to speak, it has become part of the bridge process for the transplantation of a new heart. Patients who obtain and must live on Jarvik-7's during this bridge process have lived for years after receiving their donor hearts. For example, one patient lived fourteen years after receiving his donor heart.

The Jarvik-7 consists of two pumps that function in like the heart itself. It has two ventricles in the shape of a shpere and made of polyurethane. The pumps in the Jarvik-7 are powered by air pumps (pneumatic) that push the blood through inlet and outlet valves. The artificial heart itself is attached to the natural atria of the heart by Dacron felt. The powersource for the pumps themselves are powered by drive lines attached to an "air-driven, external power system" (Jarvik-7). The power system is a console roughly the size and weight of a home refrigerator, and is portable with a backup baterry system in case of power failure.

  1. Robert Jarvik on the Jarvik-7. Jarvik Heart. <http://www.jarvikheart.com/basic.asp?id=69>.
  2. The Jarvik-7 Total Artificial Heart. April 2006. Texas Heart Institute. <http://www.texasheart.org/Research/Devices/j7tah.cfm>.

VAD's

When looking for a VAD, there are two categories to examine: Durability and bio-friendliness. The first category is pretty much self explanitory, asking 'how long does the machine normaly last' and 'can I expect mechanical failure,' but the second is a little broader. It asks 'what kind of medication do I need to take,' 'how much medication do I need to take', and 'does it increase my chance of infection.' Depending on what country you're in, you may also have to examine legal issues, as a number of devices are only approved in certain countries.
Based purely on longevity of a singal user, the best choice for a VAD is the Jarvik 2000, a very compact system which was able to support a patient for 7.5 years. However, it is still waiting approval in the U.S and has not of yet been used on a large number of patients. The Novacor LVAD, however, has been used on over 1,700 patiens, has approval in the US, EU and Japan, and, "among these recipients, 45 have been supported for more than two years, 24 for more than three years, 11 for more than four years and 1 for more than six years. Only 1.4% of the pumps have needed replacement. No patient deaths have been attributed to Novacor® LVAS failure." Sadly, both require anticoagulation medicine, but so do nearly all other VADs on the market. The exception to this is the Heartmate, which uses a biologically friendly material called fibrin to prevent the immune system from attacking the device. However, this too has disadvantages, as it increased the chances of infection and is not a durable as either the Jarvik or Novacor.

http://www.thoratec.com/medical-professionals/vad-product-information/heartmate-xve-lvad.aspx
http://en.wikipedia.org/wiki/Ventricular_assist_device
http://www.worldheart.com/products/novacor_lvas.cfm
http://www.jarvikheart.com/basic.asp?id=26
whoops. I forgot to put my sites on my blog.. so here they are!

http://en.wikipedia.org/wiki/Ventricular_assist_device#History
http://en.wikipedia.org/wiki/Robert_Jarvik
http://www.wichitacitymag.com/Wichita/July-2008/Medical-Breakthroughs/

Valve Replacements

· Ball and Cage - The caged ball design is one of the early mechanical heart valves that use a small ball that is held in place by a welded metal cage. The ball in cage design was modeled after ball valves used in industry to limit the flow of fluids to a single direction. Natural heart valves allow blood to flow straight through the center of the valve. This property is known as central flow, which keeps the amount of work done by the heart to a minimum. With non-central flow, the heart must work harder to compensate for the momentum lost to the change of direction of the fluid. Caged-ball valves completely block central flow, therefore the blood requires more energy to flow around the central ball. In addition, the ball is notorious for causing damage to blood cells due to collisions. Damaged blood cells release blood clotting ingredients; hence the patients are required to take lifelong prescriptions of anticoagulants.
· Sinlge Leaflet - tilting disc to better mimic the natural patterns of blood flow. The tilting-disc valves have a polymer disc held in place by two welded struts. The disc floats between the two struts in such a way, as to close when the blood begins to travel backward and then reopens when blood begins to travel forward again. The tilting-disc valves are vastly superior to the ball-cage design. The titling-disc valves open at an angle of 60° and close shut completely at a rate of 70 times/minute. This tilting pattern provides improved central flow while still preventing backflow. The tilting-disc valves reduce mechanical damage to blood cells. This improved flow pattern reduced blood clotting and infection. However, the only problem with this design is its tendency for the outlet struts to fracture as a result of fatigue from the repeated ramming of the struts by the disc.
· BiLeaflet - two semicircular leaflets that pivot on hinges. The carbon leaflets exhibit high strength and excellent biocompatibility. The leaflets swing open completely, parallel to the direction of the blood flow. They do not close completely, which allows some backflow. Since backflow is one of the properties of defective valves, the bileaflet valves are still not ideal valves. The bileaflet valve constitutes the majority of modern valve designs. These valves are distinguished mainly for providing the closest approximation to central flow achieved in a natural heart valve.
· Animal Tissue Valves (porcine/bovine) - Both the porcine and bovine pericardial valves are stented valves. The metal stent in these valves takes up room which could be available for blood flow. Stentless valves are made by removing the entire aortic root and adjacent aorta as a block, usually from a pig. The coronary arteries are tied off, and the entire section is trimmed and then implanted into the patient. The St. Jude Toronto Stentless Porcine Valve (SPV) is one such valve. It appears to have excellent hemodynamics, and a significant decrease in the thickness of the heart has been observed after the valve is implanted. However, the valve is extremely difficult to implant, and it is still too new to have any valid data accounting for durability. The most common cause of bioprosthesis failure is stiffening of the tissue due to the build up calcium. Calcification can cause a restriction of blood flow through the valve (stenosis) or cause tears in the valve leaflets. Since younger patients have a greater calcium metabolism, bioprostheses tend to last best in senior citizens.
· Homograft - a valve that is transplanted from a deceased person to a recipient. A recipient has minimal problems with valve rejection and they do not require immunosuppressive therapy. A homograft that has been donated must be cryopreserved in liquid nitrogen until it is needed. In cases where the valve implants fit the dimensions of the patient correctly, homografts tend to have good hemodynamics and good durability. However, it is not clear whether homografts have better hemodynamics or durability than animal tissue valves.
· Autograft – The dysfunctional aortic valve is removed and the patient's pulmonic valve is then transplanted to the aortic position. A homograft pulmonic valve is usually used to replace the patient’s pulmonic valve. The Ross procedure allows the patient the advantage of receiving a living valve in the aortic position.. The tissues of the patients’ pulmonary valve have not shown a tendency to calcify, degenerate, perforate, or develop leakage.

I think the Pulmonary Autograft is the most effective type of valve replacement. It seems to last the longest with the least complications. The long term survival and freedom from complications for patients with aortic valve disease are better with the Ross Procedure than any other type of valve replacement. After 20 years, only 15% of patients require additional valve procedures. In cases where a human pulmonary artery homograft is used to replace the patients’ pulmonary valve, freedom from failure has been 94% after 5 years time, and 83% at 20 years. This procedure proves at the moment to be very successful.

http://cape.uwaterloo.ca/che100projects/heart/files/testing.htm#mech1

Shanice

A VAD or a ventricular assist device is a device used to take over the role of the failing heart. It is not used to replace the heart, but simply to just to pump blood throughout the body. Some people use the VAD short term for recovering from a heart attack or for recovering from a surgery. Others use the VAD for long term use to use while waiting for a heart transplant. The first ventricle assist device was invented about 25 years ago by a man name Robert Jarvik. The first VADs were very heavy and bulky but could up about 10 liters of blood a minute.

VADs can be used to take over the right ventricle, the left ventricle and in some cases it is used to take over both ventricles. There are two types of pumps used in a VAD. First there is a pulsatile pump, which pumps blood through the body with a normal pulsing action then there is are centrifugal pumps that just sent the blood throughout the body continuously without a pulse. The centrifugal pump is recognized as the second generation of pumps because they are simpler than the pulsatile pump and it is smaller and more reliable.

Bioprosthetic Valves

-Bioprosthetic Valves are heart valves taken from either a human or an animal and used as a prosthetic.




-Theses Bioprosthetic valves are much more advantageous than artificial valves not only because they eliminate the need for long-term anti-coagulants, but they also don't cause any harm to blood cells.




- The human valves are separated into two categories homografts, which replace a human's valve with another human's valve, and autographs, which simply repositions a valve which is already in the patients body.




-Homografts have little to no problems with another human being able to accept the foreign valve, have good hemodynamics, which is simply defined as how much resistance to blood flow the valve gives, and durability.




-The most common procedure that uses autographs is called the Ross Procedure which replaces the valve in the aortic valve with the one in the pulmonic valve. The Ross Procedure is so effective that after 20 years only 15 percent of patients needed another surgery.


-This chart shows how successful the Homograft surgeries have been. The Blue Bar is the Percent Survival Rate, the Purple bar is percent of patients without Endocarditis, the yellow bar shows percent without pulminary tissue failure, and the green bar shows the percent of people who didn't need another surgery.


Websites

Artificial Pacemakers

An Artificial Pacemaker is a device that helps control irregular heart rhythms. Irregular in this case meaning, a heart that beats too slow, too fast, or just doesn’t beat in a regular fashion. The pacemaker device is usually implanted in the chest or abdomen. The name for irregular heart rhythms is arrhythmia. There are also 4 different methods to pacing an abnormally beating heart.

1. Percussive Pacing

2. Transcutaneous Pacing

3. Transvenous Pacing

4. Permanent Pacing

Out of all of these methods of pacing only the fourth method is permanent. The rest of the pacemakers are simply there to provide a bridge to the Permanent Pacing. The first two methods are a short bridge to Permanent Pacing while the third, Transvenous Pacing can be removed later without the addition of Permanent Pacing if the heart recovers from its arrhythmia. The Permanent Pacing device is usually made out of titanium since it is relatively inert inside the human body. The battery is usually a Lithium battery that has to be replaced about every fifteen years or so. If I had to choose which Pacemaker is the best I would say Permanent Pacing is the best. The only reason is because the permanent option is the only option that will last for any considerable amount of time.

http://en.wikipedia.org/wiki/Pacemakers#Methods_of_pacing

http://www.nhlbi.nih.gov/health/dci/Diseases/pace/pace_whatis.html

http://en.wikipedia.org/wiki/Lithium_battery

Biological Heart Valves

The heart has four chambers and blood is pumped throughout these chambers with help from heart valves. Normally, these valves open fully to let blood flow in only one direction and then close completely. However, due to heart defects, infections, or rheumatic fever, a valve can become damaged and fail to open or close fully. One way of treatment is replacing the valve with one of two types of artificial valves, mechanical or biological.

Biological valves come from different animals and are a lot more similar to human valves than mechanical. The two different types of biological valves include an implantation of a porcine valve or the use of biological tissue to create new leaflets for the valve. The porcine (or pig) valve is very similar to human valves and is the best fit for a human heart. This full implantation is known as xenograft or the "transplant from one species to another". However this is not the best form of biological valve replacement because the body tends to reject the replacement as foreign material and medication does not always help. The second type of biological valve replacement is usually more successful and more reliable. This type uses biological tissue usually of bovine (cows) or equine (horses) to make new cusps that are sewn into a metal frame. This is very effective because the tissue is strong, flexible, and durable. It is also sterilized to minimize the rejection from the body's immune system. Also, unlike the mechanical valves, the patient is not required to stay on blood thinners or take anticoagulation therapy making it the best recommendation.



http://www.americanheart.org/presenter.jhtml?identifier=4598

http://en.wikipedia.org/wiki/Artificial_heart_valve

Ventricular Assist Devices

Ventricular assist devices come in three varieties, Left Ventricular Assist Device (LVAD), Right Ventricular Assist Device (RVAD), and Bi Ventricular Assist Device (BiVAD). Although all of them affect different parts of the heart., they all share the same goal, and that is to extend the life of a person either for a short period of time "destination therapy" or until a better solution can be found "bridge therapy." VAD's in general vary largely in design but most are implanted in a similar fashion. This method of insertion being the insertion of tubing into the affected ventricle(s) that leads to a pump which pumps the blood from the ventricle(s) to the outgoing vessel ie. the pulmonary artery, aorta, or both. Where VAD’s largely differ is in the pump design.

There are two main types of pumps when it comes to VAD’s, these two being pulsatile pumps and continuous flow pumps. Pulsatile pumps rely on some form of pneumatic device to push the blood along the blood vessels. This requires that there be an opening to an air source ( a tube leading from the displacement pump to the outer body). The other major type of pump, continuous flow pumps, utilizes continuous flow as the mechanism of blood transport. This is achieved by a rotary “centrifugal” pump, many continuous flow pumps are still very controversial both in their method or action and their implantation. There is a lot of controversy on how one should suspend the rotary mechanism, to do little damage to the blood and surrounding structure, another issue is the fact that there is little known about how the body deals with continued flow.

VAD’s are implanted into the body for bridge therapy and destination therapy, but how well do they achieve this? In one study it was shown that people who were on a VAD prior to heart transplant had a 40% better chance of survival without any complications as opposed to those on alternative treatments. 1VAD’s are meant for short term use, but what if they were used for long term, about how long can you expect them to last? One could usually expect a longer life, as compared to those on medical treatment. According to one study you have a 15% better chance of surviving for 2+ years on a VAD than on medication.1 Complications arise, as do with any type of major procedure, among possible problems, the largest causes of death are mechanical failure and infection. Being a machine, VAD’s can’t last forever, and they don’t, usually suffering some form of mechanical failure within the first 2 years. Disease is another factor, whether caused by surgery itself or assisted by the hospitable growing area that the VAD and components provide, it is a problem that causes many deaths related to VAD’s.

1: "Ventricular assist device." Wikipedia, The Free Encyclopedia. 19 Jun 2008, 02:04 UTC. Wikimedia Foundation, Inc. 18 Jul 2008 <http://en.wikipedia.org/w/index.php?title=Ventricular_assist_device&oldid=220274111>.

VAD Pump Designs

VADs, or ventricular assist devices, are used when needed to aid the hardest-working parts of the heart - the ventricles. Most of these are continuously flowing, meaning they don't stop and start moving blood in a similar pattern to a functional heart. Continuous flow VADs haven't shown any life-threatening side effects related to the unnatural flow of blood, and they are easier to make. They are most often used in the right ventricle, the only left ventricular assist devices (in the US) being pulsatile, mimicing the heart's natural beating.

The motors in the continuous flow VADs contain magnets with coils around them. Electrical currents are sent through the coils at controlled levels to spin the magnet, which is connected to the rest of he assembly, which therefore moves blood. Continuous flow pumps use either axial or centrifugal pumps. Axial pumps have helix-shaped blades which spin to act much like a propeller on a boat, propelling the blood along the motor's axis, while cenrifugal pumps have rotors shaped to spin the blood toarwds the outer edges of the pump. All of the pumps certified for use in the US by the FDA use bearings to hold the rotor in place; however, there are pumps used in European countries that use magnetic or hydrodynamic forces to suspend the rotor. The benefit of these newer forms of suspension is that there is much less wear on the pump with the lack of bearings (less moving parts), and also less wear on the blood.

The design I think is the best is the axial pump with an electromagnetically suspended rotor. I feel that a centrifugal pump would be more stressful on the blood than an axial pump, and also less efficient; an axial pump pushes the blood in one direction, while the the centrifugal pump does this by spinning the blood around a lot first. Also, the electromagnetically suspended rotor seems a better choice simply due to the reduced wear on the device, making it more reliable.

http://en.wikipedia.org/wiki/Ventricular_assist_device

Prosthetic Heart Valves

A major problem that scientists and engineers have researched to fix is a diseased or dysfunctional heart valve. Prosthetic heart valves have been engineered in order to replace the valves. If a heart valve malfunctions, the entire circulatory system could be affected. When a valve is not working properly, it tends to allow some blood to flow backwards, which decreases the amount of oxygen that is delivered throughout the body with each heart beat. Another valve malfunction is known as a stenotic valve. When a valve is considered stenotic it is stiff and thus does not open fully which forces the heart to pump more to move the blood through the small opening.
There are two major types of prosthetic heart valves: mechanical heart valves and biological heart valves. A mechanical valve is synthetically made and generally is capable of lasting a lifetime because the materials are non-corrosive. Biological valves, on the other hand, are heart valves of human cadavers or certain animals. The biological valves must be sterilized properly for human implantation for the body to better accept the foreign substance. The available products that are being used to replaced dysfunctional valves vary from mechanical leaflet valves to porcine valves that come from pigs.
One particular valve consists of two leaflet, or flap-like, structures made of carbon that are in the shape of a circle. The circle is surrounded by a polyester fabric. Such a valve is used to replace an aortic or mitral valve. The patients of mechanical valves, however, usually must be able to tolerate anticoagulant drugs to prevent blood clotting on the synthetic valve. Another mechanical heart can be created with two half-discs covered by a fabric ring. The discs are made of graphite, tungsten, and carbon coating so that they will not corrode.
A biological valve can be made from part of a cow’s jugular vein that is sterilized. The vein is treated with preservatives to keep it both durable and flexible. The cow’s vein has three leaflets that open to allow the blood flow. Another biological valve can use a pig’s aortic valve that is treated with preservatives and sterilized. Some of the pig valves cannot be used in patients with high calcium metabolism, as the valve will deteriorate rather quickly. Some of the bovine, or cow, and porcine, or pig, valves are contained within a plastic stent which is attached to the walls of the heart; therefore the valve is a mixture of both mechanical and biological.
After looking at the majority of the prosthetic valves that are available today, it appears that it is better to choose a mechanical valve. In the implantation of a mechanical valve, the body is less likely to reject the valve, even though anticoagulants are generally needed. Mechanical valves can also last much longer than most biological valves.

http://www.fda.gov/hearthealth/treatments/medicaldevices/prostheticheartvalve.html
http://encarta.msn.com/encyclopedia_761572608_4/Heart.html#p67

The Three Types of Stents

Jason Sedlak

July 17th :Types of Stents


A stent is a mesh-wire tube placed inside a passageway in the body to prevent that path from constricting or closing off. While the most known placement is in coronary arteries, stents can be put in to improve flow to various organs and even to prop open the esophagus. The most basic stent is simply metal, although newer stents are features such as releasing the anticoagulants the patient normally has to take directly into the blood.


There are three major types of stents:

BMSs (Bare metal stents)

DESs (Drug-eluting stents)

and “Covered stents”


Out of these three types, I would recommend the DES. While the covered stent prevents tissue from growing through the meshing (This type of stent has a layer of non-toxic metal alloy surrounding it) and allows blood flow to resume at a pretty normal rate, it is bulkier, harder to place, and is not able to fit into more restricted areas. If I needed stents, I would go with the drug-releasing smaller stent; it just seems easier to incorporate despite the promising potential of the covered stent.


http://www.research.ucla.edu/tech/ucla05-177.htm

http://en.wikipedia.org/wiki/Stents#Types_of_stent

Left Ventricular Assist Devices

Marissa Reitsma

7/17/08

Left Ventricular Assist Devices

 

There are at least five approved LVAD devices approved for use in the United States. The Incor device, manufactured by the Berlin Heart Company, is certified and manufactured for use in the European Union. Also, there are more than four devices currently in clinical trial stage and awaiting FDA approval. The devices in the trial stage have focused on improving the lifespan of LVAD devices. Many of the newer devices, including the Jarvik 2000, serve as supplement supports to the left ventricle’s naturally pumping which allows the patient to eventually build up strength in order to become independent of the device.

Each of the current LVAD options boasts its strengths, yet it also has inevitable weaknesses. Although the Heartmate, developed by Thoratec, is used in roughly four out of five transplants, the Jarvik 2000 has some promising features that make it stand out. The Jarvik device is much smaller and lighter (it is only a twentieth to a tenth of its competitors size) than much of its competition, and the implant can fit inside the left ventricle. It also has only one moving part, no valves, and since it sits within the natural heart, it has no inflow or outflow valves, which reduces the risk of failure. Contrary to its bulkier competition, the Jarvik LVAD is totally silent. The Jarvik implant has a very user friendly interface because it is manually programmable. As long as the patient is informed and competent, many sources sugest that this is more effective than a computer run device. Finally, the battery life of the implant is eight to ten hours, allowing the patient more freedom.

 

Works Consulted

http://en.wikipedia.org/wiki/Ventricular_assist_device

http://www.jarvikheart.com/basic.asp?id=19

http://www.worldheart.com/products/novacor_lvas.cfm

http://www.thoratec.com/medical-professionals/vad-product-information/heartmate-ll-lvad.aspx